Blog, Super clone watch

P1 Factory Patek Philippe Nautilus 5990/1A-011 – Custom CH28-520 QC Review

P1 Factory Nautilus 5990 43mm Width Including Crown Measurement

P1 Factory Patek Philippe Nautilus 5990/1A-011 – Custom CH28-520 QC Review

The P1 Factory Patek Philippe Nautilus 5990/1A-011 features a stainless steel case and bracelet, blue dial, sapphire crystal and a custom CH28-520 movement.

This version is particularly notable for its range of working complications. Our QC inspection verified the calendar, seconds display, day/night indication, 24-hour function and central chronograph seconds hand.

The results provide a useful reference for evaluating both the functional configuration and movement performance of this Nautilus 5990 version.

1. Actual QC Test Results

QC Item Measured Result
Factory P1 Factory
Reference 5990/1A-011
Collection Patek Philippe Nautilus
Case and Bracelet Stainless Steel
Dial Blue
Crystal Sapphire
Movement Custom CH28-520
Daily Rate +17 s/day
Amplitude 241°
Beat Error 0.1ms
Beat Rate 28,800 BPH
Nominal Case Size 40.5mm
Measured Width (Including Crown) 43mm
Measured Thickness 13.7mm
Measured Weight 173g

All measurements refer to the individual sample inspected.

2. Custom CH28-520 Movement and Timekeeping

This P1 Factory Nautilus 5990 uses a custom CH28-520 movement operating at 28,800 BPH.

The timegrapher recorded a daily rate of +17 seconds, slightly above our usual pre-shipment QC reference range of 0–15 seconds per day.

The amplitude reading was moderate, while the beat error remained low. These figures should be considered together rather than using any single measurement to determine the movement’s overall condition.

A follow-up measurement after sufficient winding and observation would be useful before shipment. If the daily rate remains above the reference range, regulation may be considered.

The custom CH28-520 designation refers to the movement configuration used in this factory version and does not establish identical internal construction to the original Patek Philippe caliber.

3. Calendar, Dual-Time and Chronograph Function Tests

The following functions were physically tested during QC:

Position / Function Test Result
12 o’clock calendar display Operational
6 o’clock seconds display Operational
Day/night indication Operational
24-hour display Operational
Central chronograph seconds hand Operational

The functioning calendar and additional time indications are important features of this model. The central chronograph seconds hand also operates as a genuine timing function rather than a decorative hand.

The combination of these verified functions makes this one of the more functionally comprehensive Nautilus 5990 configurations we have inspected.

However, this inspection record does not establish that every original-model complication or adjustment mechanism has been reproduced identically.

4. Case Construction and Physical Measurements

The watch uses a full stainless steel case and bracelet with a blue dial.

The recorded width includes the crown, which is important when comparing this measurement with nominal case dimensions that may be taken without the crown.

The measured thickness and total weight provide additional reference points for comparing different Nautilus 5990 factory versions.

5. Overall QC Assessment

The principal strength of this P1 Factory Nautilus 5990/1A-011 is its range of verified working functions, particularly the combination of calendar, additional time displays and chronograph operation.

The movement’s daily rate was slightly outside our usual QC reference range, so further observation or regulation would be appropriate before considering the timekeeping result satisfactory.

Overall, this sample offers a functionally extensive configuration, with timekeeping adjustment remaining the main point requiring attention.

FAQ

1. What movement does the P1 Factory Nautilus 5990 use?

This version uses a custom CH28-520 movement operating at 28,800 BPH.

2. Are the calendar and dual-time indications functional?

Yes. The 12 o’clock calendar, day/night indication and 24-hour display were tested and confirmed operational.

3. Does the central chronograph seconds hand work?

Yes. The central chronograph seconds function was verified during QC.

4. Is the recorded daily rate within the usual QC reference range?

No. The measured daily rate was slightly above our usual 0–15 seconds per day reference range. Further observation or regulation may be appropriate.

5. Does the 43mm width represent the case without the crown?

No. The recorded 43mm measurement includes the crown. The nominal case size is 40.5mm.

P1 Factory Nautilus 5990 13.7mm Case Thickness Measurement P1 Factory Nautilus 5990 173g Weight Measurement

Leave a Reply

Your email address will not be published. Required fields are marked *