Blog, Super clone watch

DDF Factory Patek Philippe Aquanaut 5167/1A-001 – 330 Movement QC Review

DDF Factory Aquanaut 5167 40mm Case Width Measurement

DDF Factory Patek Philippe Aquanaut 5167/1A-001 – 330 Movement QC Review

The DDF Factory Patek Philippe Aquanaut 5167/1A-001 features a stainless steel case, black dial with Arabic numeral markers, black rubber strap and sapphire crystal.

This QC report documents the movement’s timegrapher readings alongside the watch’s measured dimensions and weight, providing a reference for evaluating this particular factory version.

1. Actual QC Test Results

QC Item Measured Result
Factory DDF Factory
Brand / Collection Patek Philippe Aquanaut
Reference 5167/1A-001
Case Material Stainless Steel
Dial Black
Hour Markers Arabic Numerals
Strap Black Rubber
Crystal Sapphire
Movement 330
Daily Rate +3 s/day
Amplitude 321°
Beat Error 0.2ms
Beat Rate 28,800 BPH
Nominal Case Size 40mm
Measured Width 40mm
Measured Thickness 8.3mm
Measured Weight 90g

These results were recorded from the individual QC sample and may vary between watches or under different testing conditions.

2. 330 Movement and Timekeeping Performance

This DDF Factory Aquanaut uses a movement designated 330, operating at 28,800 BPH.

The timegrapher results show a daily rate within our usual pre-shipment QC reference range of ±0–15 seconds per day. The amplitude reading is relatively strong, while the low beat error is another favorable measurement from this test.

Together, these readings indicate positive movement performance under the recorded testing conditions. However, they do not guarantee identical accuracy across different wearing positions or over extended periods.

The 330 designation refers to the movement used in this factory version and should not be interpreted as confirmation of identical construction to the original Patek Philippe caliber.

3. Case Dimensions and Wearing Profile

The measured thickness is a notable characteristic of this Aquanaut configuration.

Combined with its stainless steel case and rubber strap, the watch has a relatively slim and lightweight physical profile.

The recorded measurements are useful when comparing the dimensions of different Aquanaut 5167 factory versions, particularly where case thickness and total weight are important considerations.

4. Dial and Exterior Configuration

The black dial features Arabic numeral hour markers, maintaining the recognizable Aquanaut design.

The stainless steel case, black rubber strap and sapphire crystal complete the exterior configuration of the inspected sample.

This report focuses on the recorded measurements and visible design features rather than making unsupported claims about finishing tolerances, material grades or long-term durability.

5. Overall QC Assessment

The DDF Factory Aquanaut 5167/1A-001 produced favorable timegrapher results during this inspection.

Its relatively slim case profile and measured weight are useful distinguishing characteristics for comparing factory versions.

These findings provide an individual-sample QC reference rather than a guarantee of identical results across all production batches.

FAQ

1. What movement does the DDF Factory Aquanaut 5167 use?

This sample uses a movement designated 330, operating at 28,800 BPH.

2. What is the measured case thickness?

The inspected sample measured 8.3mm thick.

3. How much does this Aquanaut weigh?

The recorded weight is 90g with the black rubber strap.

4. Does the timegrapher result guarantee daily accuracy?

No. The reading reflects the movement’s condition under the specific testing conditions. Actual accuracy can vary with winding state, wearing position and usage.

DDF Factory Aquanaut 5167 8.3mm Case Thickness Measurement DDF Factory Aquanaut 5167 Black Dial Arabic Numeral Markers Close Up DDF Factory Aquanaut 5167 90g Weight Measurement

Leave a Reply

Your email address will not be published. Required fields are marked *