PPF Factory Vacheron Constantin Overseas 4500V/110A-B146 Pre-Shipment QC Review

PPF Factory Vacheron Constantin Overseas 4500V/110A-B146 Pre-Shipment QC Review

The PPF Factory Vacheron Constantin Overseas 4500V/110A-B146 features a full stainless-steel construction, brown dial, sapphire crystal and Cal.5100-style automatic movement.

One technical point worth understanding before purchasing this version is its movement construction. The movement is based on a Miyota 9015 architecture and modified into an integrated Cal.5100-style appearance. Because of this movement architecture, the automatic rotor can produce a noticeable spinning sound during operation. A certain amount of rotor noise is therefore a normal characteristic of this configuration rather than automatically indicating a movement fault.

During this specific pre-shipment QC test, the movement recorded +8 seconds/day, 294° amplitude, 0.3ms beat error and 28,800 BPH.

The watch measured 40.1mm in width, 11.8mm in thickness and 160g in weight.

QC Test Results

Inspection Item Measured Result
Factory PPF Factory
Model Vacheron Constantin Overseas 4500V/110A-B146
Dial Brown Dial
Case / Bracelet Stainless Steel
Movement Cal.5100 Style / 9015-Based
Daily Rate +8 s/day
Amplitude 294°
Beat Error 0.3ms
Beat Rate 28,800 BPH
Crystal Sapphire Crystal
Measured Width 40.1mm
Measured Thickness 11.8mm
Measured Weight 160g

These figures were recorded from this specific watch during pre-shipment QC. Small variations can occur between individual watches due to production tolerances, power reserve, testing position, bracelet sizing and measurement methods.

Cal.5100-Style 9015-Based Movement

This PPF Factory Overseas 4500V uses a movement based on the Miyota 9015 architecture, modified to reproduce the visual layout of the Cal.5100.

This is an important technical distinction when comparing different Overseas 4500V versions.

Although the movement is presented with a Cal.5100-style appearance, its underlying architecture is based on the 9015 platform. Buyers should therefore evaluate the movement according to its actual construction rather than judging it only by the appearance visible through the caseback.

For QC purposes, the movement should be evaluated through actual timegrapher readings, winding performance and automatic rotor operation.

Timegrapher Performance

The movement recorded:

Daily Rate: +8 seconds/day
Amplitude: 294°
Beat Error: 0.3ms
Beat Rate: 28,800 BPH

The 294° amplitude indicates that the movement was operating with a strong power state during this particular test.

The +8 seconds/day rate falls within the commonly used ±0–15 seconds/day pre-shipment QC reference range, while the 0.3ms beat error provides another useful reference for the movement’s condition at the time of testing.

Actual daily accuracy can change depending on power reserve, temperature, resting position and wearing conditions, so these figures should be treated as the measured results of this individual watch.

Why Does the Rotor Make a Noticeable Sound?

An important characteristic of this version is the sound produced by the automatic rotor.

Because the movement uses a 9015-based architecture, the rotor can spin relatively freely and quickly. During wrist movement, this can produce a more noticeable spinning or mechanical sound than some other automatic movements.

For this particular movement construction, a certain level of rotor sound can therefore be normal and does not by itself indicate a mechanical problem.

The important distinction during QC is whether the rotor rotates normally and whether automatic winding continues to function correctly.

If the sound is accompanied by abnormal scraping, resistance, unstable winding or other mechanical symptoms, further inspection would be appropriate. Normal rotor spinning noise alone should not automatically be treated as a defect.

40.1mm Actual Width and 11.8mm Thickness

This specific QC sample measured:

Width: 40.1mm
Thickness: 11.8mm

Although the model is commonly categorized as a 41mm Overseas, the actual width recorded during this particular measurement was 40.1mm.

This demonstrates why physical QC measurements can be useful when comparing different versions. Nominal model size and an actual measurement are not always exactly the same, especially when different measuring points are used.

The 11.8mm thickness also provides a useful reference for evaluating the side profile of this specific PPF Factory version.

160g Measured Weight

The measured weight of this specific watch is 160g.

Because the Overseas uses an integrated full-steel bracelet design, total weight contributes noticeably to the overall wrist feel.

However, weight should not be evaluated in isolation. The case, bracelet construction, clasp, dimensions and overall weight distribution should be considered together.

The 160g measurement applies to this specific QC sample, and small differences may occur between individual watches.

Brown Dial and Full-Steel Construction

This 4500V/110A-B146 configuration combines a brown dial with a full stainless-steel case and bracelet.

For exterior QC, the dial should be inspected under different lighting conditions because the appearance of brown can change noticeably depending on light intensity and viewing angle.

Attention should also be given to the hour markers, hands, date window, bezel, case surfaces, bracelet links and clasp.

The Overseas design relies heavily on the relationship between the case and integrated bracelet, making finishing consistency across these components particularly important.

Sapphire Crystal and Caseback

This version uses a sapphire crystal.

The crystal should be inspected for surface condition and clarity, while the dial underneath should be checked for alignment and cleanliness.

For versions where the movement is visible through the caseback, the movement presentation can also be inspected visually. However, the appearance of the movement should be considered separately from its actual architecture and operating performance.

In this case, the movement has a Cal.5100-style presentation while using a 9015-based construction.

Overall QC Assessment

This PPF Factory Vacheron Constantin Overseas 4500V/110A-B146 recorded the following movement results:

+8 seconds/day
294° amplitude
0.3ms beat error
28,800 BPH

The physical measurements were:

Width: 40.1mm
Thickness: 11.8mm
Weight: 160g
Crystal: Sapphire
Movement: 9015-based Cal.5100-style automatic movement

One of the most important points buyers should understand about this version is the automatic rotor behavior.

Because of the 9015-based movement architecture, the rotor can spin quickly and produce a noticeable sound. This characteristic can be normal for this movement configuration and should not automatically be interpreted as a defect.

During QC, the more important points are whether the rotor operates freely without abnormal scraping and whether the automatic winding and movement functions work correctly.

Combined with the 294° amplitude, +8 seconds/day rate, 40.1mm measured width and 11.8mm thickness, this individual watch provides useful real-world data for buyers comparing PPF Factory Overseas 4500V versions.

FAQ | PPF Factory VC Overseas 4500V

What movement does the PPF Factory Overseas 4500V use?
This version uses a 9015-based automatic movement modified with a Cal.5100-style appearance.

What were the timegrapher results?
This specific watch recorded +8 seconds/day, 294° amplitude, 0.3ms beat error and 28,800 BPH during testing.

Is rotor noise normal on this version?
A noticeable rotor spinning sound can be normal because of the 9015-based movement architecture. The rotor can spin relatively quickly and freely. QC should distinguish normal rotor noise from abnormal scraping, resistance or winding problems.

What are the actual measured dimensions?
This specific watch measured 40.1mm in width and 11.8mm in thickness.

How much does this PPF Factory Overseas 4500V weigh?
This specific QC sample measured 160g. Small differences may occur between individual watches.

What should be checked before shipment?
In addition to timegrapher performance, QC should include automatic winding and rotor operation, date and time functions, dial alignment, sapphire crystal, case finishing, bracelet, clasp and overall exterior condition.