Clean Factory Rolex Submariner 124060 No Date Pre-Shipment QC Review

Clean Factory Rolex Submariner 124060 No Date Pre-Shipment QC Review

The Clean Factory Rolex Submariner 124060-0001 is the No Date configuration, featuring a black dial, 904L stainless-steel construction, sapphire crystal and Cal.3230 movement.

For this specific pre-shipment QC sample, the actual measured dimensions were 40.1mm in width and 12.5mm in thickness.

During the timegrapher test, the Cal.3230 movement recorded -2 seconds/day, 260° amplitude, 0.4ms beat error and 28,800 BPH.

QC Test Results

Inspection Item Measured Result
Factory Clean Factory
Model Rolex Submariner 124060-0001
Version No Date
Case Material 904L Stainless Steel
Dial Black Dial
Movement Cal.3230
Daily Rate -2 s/day
Amplitude 260°
Beat Error 0.4ms
Beat Rate 28,800 BPH
Crystal Sapphire Crystal
Measured Width 40.1mm
Measured Thickness 12.5mm

These measurements belong to this specific watch. Small differences can occur between individual samples due to production tolerances, power reserve, testing position and measurement methods.

Cal.3230 Movement Performance

This Clean Factory Submariner 124060 is equipped with a Cal.3230 movement, matching the No Date layout of this model.

The timegrapher recorded:

Daily Rate: -2 seconds/day
Amplitude: 260°
Beat Error: 0.4ms
Beat Rate: 28,800 BPH

The daily rate of -2 seconds/day represents a small deviation under this particular test condition.

The amplitude measured 260°, while the beat error was 0.4ms. Together with the 28,800 BPH beat rate, these readings provide a useful record of the movement’s operating condition during pre-shipment inspection.

Actual daily performance may vary with power reserve, temperature, resting position and wearing conditions.

No Date Cal.3230 Configuration

An important characteristic of the 124060 is its No Date dial configuration.

Unlike a Submariner Date, there is no date window or date magnifier on the crystal. This produces the clean and symmetrical black-dial layout associated with the No Date Submariner.

The Cal.3230 movement also corresponds to this time-only configuration, making the movement structure an important point to confirm when comparing different Submariner references.

40.1mm Actual Width

Although the 124060 is generally identified as a 41mm-class Submariner, the actual measurement of this specific QC sample is 40.1mm in width.

This is why actual QC measurements can be useful when comparing watches rather than relying only on the nominal size used in the model description.

Measurement results can vary depending on exactly where the case is measured, so the 40.1mm figure represents this individual watch and the measurement method used during QC.

12.5mm Measured Thickness

This specific watch measured 12.5mm in thickness.

Thickness is particularly useful for evaluating the side profile of a sports watch because it influences how the case sits on the wrist.

When comparing different Submariner versions or factory batches, width and thickness should therefore be considered together rather than relying only on the nominal case diameter.

904L Stainless-Steel Construction

This version uses 904L stainless steel.

For exterior QC, attention should be given to the transition between brushed and polished surfaces, case edges, bracelet links, clasp and overall surface condition.

The Submariner’s relatively simple exterior design also means that alignment and finishing details can be easier to notice, particularly around the bezel, dial and bracelet.

Black Dial and Sapphire Crystal

The watch combines a black dial with a sapphire crystal.

The absence of a date magnifier gives the crystal a cleaner appearance than Date versions of the Submariner.

During QC, the dial should be inspected for hour-marker and hand alignment, printing quality and overall cleanliness.

The sapphire crystal should also be checked under different lighting angles for visible marks or defects before shipment.

Bezel and Functional Inspection

For a Submariner, the rotating bezel is an important functional component.

Pre-shipment QC should include actual bezel rotation to check its operation, alignment and positioning.

The crown, winding and time-setting functions should also be physically tested.

This means the overall assessment should combine:

Movement testing → Functional testing → Exterior inspection

rather than relying only on static photographs or timegrapher numbers.

Overall QC Assessment

This Clean Factory Rolex Submariner 124060-0001 recorded the following movement results during pre-shipment testing:

Daily Rate: -2 seconds/day
Amplitude: 260°
Beat Error: 0.4ms
Beat Rate: 28,800 BPH

The actual dimensions of this specific watch were:

Width: 40.1mm
Thickness: 12.5mm
Crystal: Sapphire
Movement: Cal.3230
Case Material: 904L Stainless Steel

The No Date configuration, Cal.3230 movement and clean black-dial layout are the main characteristics of this reference.

For this model, actual movement condition should be evaluated together with the bezel operation, crown functions, dial alignment, case finishing and bracelet construction before shipment.

The -2 seconds/day reading is a particularly good result from this individual QC test, while the remaining movement and physical measurements provide useful reference data for comparing this specific Clean Factory 124060 with other samples.

FAQ | Clean Factory Rolex Submariner 124060

What movement does the Clean Factory Submariner 124060 use?
This specific QC sample is equipped with a Cal.3230 movement running at 28,800 BPH.

What were the timegrapher results?
The movement recorded -2 seconds/day, 260° amplitude, 0.4ms beat error and 28,800 BPH during testing.

Is the Rolex 124060 a No Date Submariner?
Yes. The 124060 uses a No Date dial configuration, without a date window or date magnifier on the crystal.

What is the actual measured width?
This specific QC sample measured 40.1mm in width. Actual measurements can differ from the nominal model size depending on the measuring position and method.

How thick is this Clean Factory 124060?
The actual measured thickness of this specific watch is 12.5mm.

What should be checked during QC?
In addition to the Cal.3230 timegrapher readings, QC should include bezel operation and alignment, crown functions, time setting, dial and hand alignment, sapphire crystal, case finishing, bracelet and clasp condition.