Clean Factory Rolex Daytona 126519LN-0006 40MM White Gold Rubber Strap Black Eye Grey Dial

Product Overview

The Clean Factory Rolex Daytona 126519LN-0006 replica combines a grey dial with three contrasting black subdials. Its supplier-listed 40mm case features a white gold tone appearance, while a black rubber strap complements the black ceramic bezel.

Applied baton markers and silver-tone hands define the display. Meanwhile, the red Daytona lettering adds a small color accent beneath the center of the dial.

The supplier describes the movement as “4131 Automatic.” This is a replica watch, and that designation does not establish an original Rolex movement or equivalent performance.

Technical Specifications
Feature Specification
Factory Clean Factory
Brand / Design Rolex Daytona replica
Supplier Model Reference 126519LN-0006
Case Diameter 40mm, according to supplier
Movement Supplier-described “4131” automatic replica movement; underlying caliber unverified
Case White gold tone appearance; supplier lists “White Gold,” but composition remains unconfirmed
Strap Black rubber strap
Dial Grey dial with three black subdials and applied baton markers
Bezel Black ceramic with tachymeter markings, according to supplier
Crystal Sapphire crystal, according to supplier
Clasp Folding clasp, according to supplier
Clasp Material Supplier lists “White Gold”; composition and gold content unconfirmed
Display Layout Central hands and three subdials; actual chronograph operation requires confirmation
Date Display No date window visible
Water Resistance Factory-rated 10 ATM; not independently tested
Movement and Functions
Automatic Movement

The supplier lists a “4131” automatic movement. However, the supplied information does not confirm its manufacturer, internal construction, power reserve, or accuracy.

Accordingly, this page uses the supplier’s movement designation without claiming an original Rolex caliber, certified chronometer performance, or a particular balance system.

Hour and Minute Hands

The shorter broad central hand indicates hours, while the longer broad hand indicates minutes. Their light-colored inserts contrast with the grey dial.

The photograph shows these inserts, but it does not establish luminous brightness or duration.

Central Chronograph-Style Hand

The slender central hand corresponds to the chronograph seconds position in this dial layout. A working chronograph uses this hand to measure elapsed seconds.

However, the supplied photograph cannot confirm its actual operation on this replica. Its behavior requires verification during inspection.

Three Subdials

The markings suggest the following intended layout. Actual operation remains subject to confirmation.

Position on the Dial Apparent Intended Function
3 o’clock Chronograph counter for elapsed minutes, with a 30-minute scale
6 o’clock Running seconds display, with a 60-second scale
9 o’clock Chronograph counter for elapsed hours, with a 12-hour scale

These positions refer to the dial’s orientation, regardless of the angle of the product photograph.

Tachymeter Bezel and Pushers

The bezel carries a tachymeter scale marked “Units Per Hour.” With a functioning chronograph, this type of scale allows an average-rate calculation over a known unit of distance.

Meanwhile, two pushers sit beside the crown. Confirm their operation and the movement-specific instructions before using the timing controls.

Case and Dial

The white gold tone case frames a grey dial with three black subdials. This contrast creates the “Black Eye Grey” appearance described by the supplier.

The black bezel continues the dark accents, while its light-colored numerals provide visual contrast. In addition, polished-looking case surfaces complement the silver-tone hands and hour markers.

The supplier describes the case as white gold without providing material documentation. Therefore, “white gold tone” describes its appearance only; it does not guarantee solid gold, gold purity, or white gold plating.

Strap and Clasp / Buckle

The black rubber strap complements the bezel and subdials. Its curved profile gives the watch a coordinated appearance.

The supplier specifies a folding clasp and lists its material as white gold. However, the photograph does not show the clasp, and its composition remains unconfirmed.

The available information also does not establish an internal metal reinforcement, a particular adjustment system, or genuine Rolex strap construction. Confirm the strap size and fitting method before making adjustments.

Water Resistance

The factory lists 10 ATM water resistance, but no independent pressure-test result accompanies the supplied information.

Consequently, this listing does not guarantee suitability for swimming, showering, or diving. Keep the watch out of water until a qualified watchmaker verifies its water resistance, and avoid operating the crown or pushers when wet.

Care Instructions
Wipe the case and crystal with a clean microfiber cloth.
Clean the rubber strap gently, then dry it thoroughly.
Avoid abrasive cleaners, solvents, and polishing compounds.
Protect the bezel and crystal from knocks against hard surfaces.
Keep the watch away from strong magnets and extreme heat.
Confirm the correct chronograph procedure before operating the pushers.
Check strap fit and clasp closure before wearing the watch.
Frequently Asked Questions
Is this an original Rolex Daytona?

No. This is a Clean Factory replica using the supplier reference 126519LN-0006. The “4131” designation does not indicate an original Rolex movement.

Is the case solid white gold?

The supplier lists “White Gold,” but the available information does not verify gold content, plating, or base metal. Therefore, this page uses “white gold tone” to describe the appearance.

Does the large central hand show normal running seconds?

The layout assigns the slender central hand to chronograph timing and the 6 o’clock subdial to running seconds. However, inspection must confirm that this replica follows those functions.

Are all three subdials functional?

The photograph shows three marked subdials, but it cannot prove their operation. The running seconds and elapsed-time counters require confirmation during inspection.

What happens before shipping?

After the watch arrives from the factory, we inspect its condition and check the movement. We then provide two QC videos for your review.

Once you confirm the watch model and your shipping information, we arrange shipment.

Please identify the merchant when purchasing to prevent buying counterfeit Clean Factory products.

Welcome to Clean Factory Watch .We are dedicated to providing you with high-quality 1:1 replica watches that offer exceptional value at reasonable prices. Each watch is carefully photographed in real life to ensure an accurate description, allowing you to confidently choose a style that suits your taste and make an informed purchasing decision.

Please note that the listed prices do not include a watch box. If needed, it can be purchased separately. Perfectionists are advised to consider carefully before placing an order. If you have any specific requirements, feel free to contact our customer service — we’re here to help.

We place great importance on customer satisfaction and the overall shopping experience. If there are any quality issues with your purchased watch, please refer to our return and exchange policy and reach out to us. We will do our best to resolve the issue and ensure you are happy with both our products and service.